|
Product Details:
Payment & Shipping Terms:
|
| Valve: | Automatic Or Manual | Recovery Rate: | 55-65% |
|---|---|---|---|
| Material: | Full Stainless Steeel 304/316 | Desalination: | 99.5% |
| After-sales Service Provided:: | Online Support | Water Pump: | Grundfos/ CNP |
| High Light: | sea water purification machine,salt water purification system |
||
HMI Touch Control 6T Reverse Osmosis Plant With CIP Wash Equipment&UV Sterilizer
6T RO specifications:
| NO. | DESCRIPTION | Origin/Brand | QTY |
| 1 | Raw Water Pump 304 SS | CNP | 1set |
| 2 | Quartz sand filter φ900×1850mm×2mm | CHUNKE | 1set |
| 3 | Activated Carbon Filter φ900×1850mm×2mm | 1set | |
| 4 | Metering dosing system( scale inhibitor) | SEKO | 1set |
| 5 | PH Regulating System | SEKO | 1set |
| 6 | Cartridge Filter (5μm) 40″×7 core | CHUNKE | 1set |
| 7 | High-Pressure Pump 304SS | CNP | 1set |
| 8 | Reverse osmosis desalination device water production: 6.0m3 / h, desalination rate: 96 ~ 99%, the system water utilization: 50% | 1set | |
| 9 | CIP Washing equipment(6.0m3/h) | CHUNKE | 1set |
| 10 |
Electronic control system Taiwan Weinview man-machine interface touch screen, Japan Mitsubishi PLC automatic control, France Schneider Electric components, RO membrane automatic flushing, the original water tank and pure water tank water level control automatically stop, low pressure, high pressure, overheating, overcurrent, phase loss protection and Alarm function, reserved manual operation function for debugging and emergency treatment. |
CHUNKE | 1set |
| 11 | Sterile Pure Water Tank 5000L | CHUNKE | 1set |
| 12 | UV Sterilizer 12GMP | CHUNKE | 1set |
| 13 | Stainless steel Pipe fittings 1.5mm , valves | CHUNKE | 1set |
Why to use CIP system
1, The CIP in-situ cleaning system has low economic operation cost and can effectively clean the production equipment such as cylinder tanks and pipes. The whole cleaning process runs in closed production equipment, cylinder tanks and pipes. Greatly reduced the chance of secondary pollution.
2, Extracorporeal circulation system can effectively reduce energy consumption.
3, The water return system can effectively reduce the water used in CIP.
4, Especially the automatic CIP cleaning system can automatically detect the cleaning liquid. Add liquid, discharge, display and adjustment, CIP cleaning effect is good, so it is more in line with the modern large-scale fluid medicine. Food processing technology hygiene requirements and production environment Claim.
HMI Touch Screen Control Basic Skills and PLC advantage:
Device working status display, such as indicators, buttons, text, graphics, curves, etc.
The main type of equipment connected is PLC
1, It can set the number of stations and position parameters of different types of products, and can monitor the running process online;
2, The equipment is flexible and convenient to operate, can realize start and pause, automatic and manual mode switching, counting and clearing, cylinder pressing time adjustment, etc.;
3, The automatic discharge, feeding and fixing of the screw are automatically completed by the machine at one time without manual assistance;
4, High-speed production cycle, can achieve a single station speed of not less than 1-1.5 seconds / piece. High positioning accuracy, position error is not more than 0.02 mm;
Picture of Detail
Contact Person: Cara Leong
Tel: +8613246486689
